LED stair lighting controller with 2 PIR motion sensors, suitable for up to 40 steps.

This LED stair lighting controller with motion sensors is a smart solution that allows you to automatically control the LED strip lighting on your stairs, step by step. The device features two PIR sensors that detect human movement from both sides of the stairs and gradually turn the lights on or off, ensuring safer movement in the dark and saving energy.

LED stair lighting controller - key features

• Sequential Lighting — The light turns on and off step by step, following the person's movement on the stairs, creating an impressive effect.
• Two PIR motion sensors — Sensors are installed on both sides of the stairs and detect movement when going up or down.
• Flexible adjustment — Adjustable brightness (99 levels), delay time (99 levels), speed (99 levels) and 12 different lighting modes.
• One connecting cable — The main cable connects all LED strips without complex wiring, making installation easier.
• Up to 99 steps — The system supports up to 99 stair steps with a special 4-contact main cable, suitable even for large staircases.
• Digital control panel — All settings are made via the digital display, which shows the value of each parameter.

Technical specifications

• Voltage: DC12V / DC24V
• Maximum current: 10A
• Galia: kiekvienam žingsniui <15W, iš viso <240W (DC12V max 120W; DC24V max 240W)
• Sensors: 2 PIR sensors, installed on both sides
• Special feature: 4-contact main cable for up to 99 steps
• Adjustable: delay time, speed, brightness, 12 light modes
• PIR sensor installation: fixed or flush-mounted (hole Ø15mm)
• Brightness levels: 99 (HH01-HH99), from 2% to 100%
• Delay time levels: 99 (LL01-LL99), from 4s to 200s
• Speed levels: 99 (EE01-EE99), from 150ms (fastest) to 2600ms (slowest)
• Light strip modes: 12 (FF01-FF12)
• Step settings: 1C01-1C99 (1st floor), 2C01-2C99 (2nd floor) and so on
• Package contents: 1x controller, 1x main cable with 16 or 20 steps, 2x PIR sensors (1m length), set of tools and accessories
• LED strip and power supply are sold separately
• Water resistance: none (the product is not water resistant)
• Important: the controller does not control lighting on both sides of the stairs simultaneously
• Installation requirement: A/B sensors should be mounted at the entrance and exit of the stairs, facing towards the human body
• Warning: a low-voltage transformer is required, do not connect directly to 220V
• Warning: do not reverse the +/- poles, otherwise the controller will not work

Who is it suitable for and how to use it?

This LED stair lighting controller is perfect for stairwells in homes, offices, or public buildings where automatic, energy-saving lighting is needed. Before installation, it is necessary to choose the correct number of steps and connect the LED strips to the main cable before turning on the power. It is recommended to install sensors at the beginning and end of the stairs, facing the direction of human movement, so that the lighting turns on smoothly and accurately.

Buyer questions

Q: How many steps can this LED stair lighting controller control?
The controller with a special 4-contact main cable can control up to 99 steps. When purchasing, it is necessary to choose a set that matches the number of steps in your stairs.

Q: Can the controller be connected directly to a 220V power outlet?
No, the product operates on a low voltage of 12V-24V, so a transformer is required. Connecting it directly to 220V will damage the controller and may cause a malfunction.

Q: Can the LED strip be connected or disconnected while the controller is turned on?
No, the LED strips must be installed before turning on the power. Installing or removing the strip while the controller is operating can burn out the main cable.

This LED stair lighting controller with motion sensors provides safe, automatic, and energy-saving lighting for homes or public buildings. Suitable for both small and large staircases with up to 99 steps.

Sources: PIR sensor principle of operation | TopSmart store